7 signs the network in your building holds you back

7 signs the network in your building holds you back

Choppy video calls, WiFi that drops, smart systems that do not work. Seven signs that the network in your commercial building can no longer keep up.

Do video calls stutter, does the WiFi drop in some places, or do smart systems not work as promised? Then the network in your building is probably holding you back. That costs time, money and energy. The good news: you can measure it and fix it.

In short:

  • You first notice a weak network through small annoyances.
  • It also slows down sustainability, because smart systems run on the network.
  • Seven signs help you recognise it.
  • A measurement shows where the problem is.

1. Video calls stutter

Images that freeze and sound that drops. Especially at busy moments, when many people are calling at the same time. That often points to too little capacity in the connection or in the network inside the building.

2. The WiFi drops in certain places

It works in the meeting room, but not in the corner by the window. Or the connection drops when you walk through the building. That is usually caused by too few or badly placed access points.

3. It is slow at busy moments

At nine in the morning everyone logs in. Then everything slows down. A network that only works well when it is quiet is not built for real use.

4. There is only one internet connection

If that one connection fails, everything stops. A second connection via a different route prevents that. Many buildings lack that backup.

5. Smart systems do not work well

The climate control reacts slowly. Sensors do not pass on data. The smart meters show gaps. Often the systems themselves are not the problem, but the network they run on. Read more about IoT and energy saving.

6. Everything runs on one network

Guests, staff, cameras and the climate system share the same network. That is insecure and can slow the network down. A separated setup is called network segmentation. Read more tips in our blog about connecting IoT securely.

7. Nobody knows how the network was installed

There are no drawings. Nobody knows which cables run where. With every fault or renovation, everyone starts from scratch. That makes every change expensive.

Why this is also about sustainability

A weak network is not just annoying. It also slows down sustainability. Smart systems that save energy, such as occupancy sensors and smart meters, send their data over the network. If the network does not work well, the savings stay on paper.

What can you do?

  1. Take the free sustainability scan. In 15 questions you see a first indication.
  2. Have it measured. With a pre-inspection we walk through the building and measure where it matters.
  3. Look at your connection. With connectivity advice you know whether your connection fits your use.

Frequently asked questions

How do I know whether the problem is my internet connection or the network in the building?

You only see that when you measure in several places. If it is slow everywhere, the connection is often the cause. If it is only slow in certain places, the network inside the building is usually the cause.

What does it cost to have the network measured?

A pre-inspection costs from €750 excl. VAT. You receive an indication of the IT-Label and a top five of measures.

Does the IT-Label help with this?

Yes. The IT-Label measures, among other things, the connection, the cabling, the WiFi and performance under real load. That shows in black and white where the network falls short.

Do you recognise one or more signs?

Start with the free sustainability scan, or request a proposal for a pre-inspection.